Becka

Three-in-One

Instruction Manual

Your best orgasm ever is beckoning…

This all-in-one wonder offers three different functions so you can reach unprecedented levels of pleasure. The Becka boasts a classic vibrating wand on one end for external stimulation, and an insertable end that both vibrates and, most importantly, beckons inside you with a “come hither” motion, designed to stimulate the female G-spot (or male prostate) and give you the most intense, satisfying climax of your life.

Use it in manual mode or turn up the heat by controlling it in the Vibes Only app.

Why you’ll love the Becka Three-in-One:

  • Connects to the Vibes Only app

  • Vibrating wand end for external pleasure

  • Vibrating, insertable end for internal stimulation

  • Beckoning motion for internal/G-spot sensations

  • 5 levels of vibration and 5 patterns (unlock more in the Vibes Only app)

  • Medical-grade, body-safe silicone

  • Water resistant

Hope you’re ready, this vibrator only gets better…

Connect to the Vibes Only app to unlock a whole new world of self-love where you’ll handpick your own fantasy and become the main character. Your vibrator will work in tandem with the erotic reverie for a full-blown journey into orgasmic bliss.

Start Vibing

This vibrator comes partially charged. To get it all the way up, charge before use.

On your device, hold down each power button for two seconds to turn on.

Your Bluetooth will be enabled when the device turns on. The light will flash to indicate it is discoverable.

The app will detect your device. Select it, and your vibrator is synced!

To adjust intensity and patterns manually:

Click the buttons to enjoy various sensations.

Charging Instructions

If your vibrator is feeling a little lowkey, it may be time for a charge.

Due to the unique design, each Vibes Only model charges slightly differently.

First, plug your USB cord into a standard charging block (high-power charging blocks may damage the battery). 

Connect the magnetic charging points to the matching points on your vibrator. The light on your device will flash to indicate that it’s charging.

When it is fully gassed up (approx. 2.5 hrs) the light will change to a steady glow.

Power your vibrator

Care for your vibrator
...and it will love you back!

Care Instructions

We can’t recommend using a water-based lubricant enough, such as Vibes Only Juiced Up. Avoid using a silicone-based lubricant as this could kill your vibrator. If you must use a silicone-based lubricant, perform a patch test first.


After every use, sanitize your toy with our Clean-her foaming toy cleanser, or you may use warm water and antibacterial soap. Dry thoroughly with a clean towel or air dry. Store in a cool, dry place and keep your vibrator away from toys made of other materials. Remember to charge periodically to maintain the battery life.

  • Submerge the metal part of the handle in water as this may damage the device.

  • Use with oil-based massage oils or lubricants as it may damage the silicone.

  • Leave your vibrator in direct sunlight or ever expose it to extreme heat.

What not to do

Troubleshooting

Your vibrator’s light does not pulse when the charger is connected? This could be why:

  • Battery is fully charged (go off!)

  • Battery is drained and will require several minutes to recognize that it is being charged.

  • Charger is not properly connected. Check your charging block and charging cable.

Your vibrator does not connect with your phone when the button is pressed?

  • Battery is drained and your device requires charging.

  • Make sure you give Vibes Only permission to access Bluetooth in your phone settings.

  • The Bluetooth on your phone is not enabled. Make sure to enable, or reset your phone if needed.

  • You have exceeded the 10 seconds required for your vibrator to ‘find’ a device. Reset both your vibrator and your phone by turning off, waiting 30 seconds, then turning on. Now try again making sure your phone has fully restarted, with the Bluetooth switched on.

If you experience any other problems with your Vibes Only product or have any questions regarding operation, visit www.vibesonly.com or please contact help@vibesonly.com.

Becka Three-in-One

Total length: 8.75"

Widest insertable part: 1.2" Diameter

Longest insertable part: 6"

Made in China

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated

to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.